‘Clean’ is no longer enough. Cleaning off stains and grime doesn’t mean you’ve gotten rid of the microbes still lurking. These invisible enemies that strike anytime can have a range of health effects – from harmless but opportunistic to highly infectious & toxic.
Sanitizing using conventional methods and products offers a one-time protection that fades in hours or even minutes! For example, alcohol-based sanitizers only offer 1-2 minutes of antimicrobial protection; UV light and plasma 1 hour of protection; bleach and biocides for 3 hours. The protection wears off right after new bacteria, viruses or pollutants are reintroduced into our surroundings. That means if you touch, breathed on, sat on, sneezed on a surface that was recently disinfected just once, kiss your protection goodbye and say hello to contamination - again.
It’s not practical to wipe down every surface we’ve touched with alcohol or bleach each time we come in contact with it, nor deep cleaning every hour.
What if there was a way for you get constant effective protection for you and your loved ones?
Uses proprietary polymer coating technology that forms an invisible bed of spikes that ruptures bacteria, viruses, fungus, mold and yeast upon contact. Continuous 24x7 protection, for up to 4 months (industrial version)!
Full Circle's Bio-Armor Repel is the basic product in the series. As a plus, the barrier creates a degree of water resistance that allows liquids to wick and slide so you have a little more time to sop up the mess without worrying about germs.
Repel is best for high touch surfaces and soft furnishings that you normally do not clean often or launder. With a level of water resistance, you can get peace of mind.
BIO-ARMOR PHOTOACTIVE PROTECT
Bio-Armor PhotoActive Protect is the advanced product in the series. It harnesses the power of light in its dual action protection with:
A) Titanium Dioxide, a natural mineral energized by light to release anions that aid in breaking down non-particulate pollutants like cigarette smoke, allergens, unseen gas compounds and odor in the air, producing water and carbon dioxide as by-products.
B) An antimicrobial surface barrier that forms a bed of spikes to rupture microbes like balloons on contact.
With PhotoActive Protect's dual action, any surface can turn into an air purifier to remove harmful compounds in the air. At the same time, the remnants of the microbes that come in contact with the barrier can just be washed away during the laundering process.
This product does not produce any water resistant coating, unlike Repel. Thus, this is also best suited for protecting and deodorizing regularly laundered objects like clothing, linen, bath and hand towels, dish towels, sponges, makeup brushes, socks, gym bags and many more! With its composition, microbes won't cling to clothing but will be ruptured upon contact and the remnants of bacteria and viruses can just be washed away during laundering.
PhotoActive Protect can also be used on hard surfaces.
BABY- & PET-SAFE.
All of our ingredients are approved by the US FDA and registed in the US EPA. No harmful chemicals mean no risk to your little ones and pets. Odorless and even deodorizing. The coating readily biodegrades over time.
DURABLE & LONG-LASTING PROTECTION
With proprietary antimicrobial protection technology, have peace of mind with an invisible protective coating that does not come off even with repeated wiping, laundering or cleaning.
Our professional service doesn’t end after your place is disinfected. As a guarantee to the effectiveness of our treatment, we will follow up with you 1 month later to measure the level of bacteria at your place. If the bacteria has grown over an unhealthy level, we will disinfect your home free-of-charge, no questions asked.
Getting better protection for longer can be done in 3 easy steps:
STEP 1. CLEAN & SANITIZE
Remove dust, dirt, grime & debris by wiping or dusting, and then sanitize with your disinfecting method of choice.
STEP 2. TREAT & PROTECT
Treat with Bio-Armor. For hard surfaces, spray on a thin even layer and spread with a new clean microfiber cloth. Allow the surface to dry completely for 15 to 30 minutes. Use normally.
For soft surfaces & textile, spray until damp. Allow to dry completely before wearing.
STEP 3. DRY & CURE
Do not use water or soap on the object for the next 8 hours at least. This is called the curing time.
This curing time is important! Patience is a virtue! Time is needed to get the bonds to form.
Sunlight can help form the bonds as well, but this is optional.
Don’t take our word for it. We have certified third-party laboratory results but see for yourself with these photos below!
Our team conducted an experiment in which slices of bread were rubbed on different areas of the same office table with different treatments: (a) uncleaned, (b) immediately after cleaning/sanitizing, (c) 1 day after cleaning/sanitizing, (d) Sanitized & treated with Bio-Armor. See the mold growth after 14 days.
This experiment shows that microbes start growing even right after cleaning and sanitizing! To extend the life of your sanitation efforts, Bio-Armor give you the peace of mind for proactive ongoing protection.
Of course we won't leave you hanging!
Our team conducted a 3-month long hygiene monitoring on a treated section of an office table where swab testing was conducted every 2 weeks. Bio-Armor was not reapplied.
This results shows that microbial activity is quantitatively reduced. Therefore, high levels of hygiene are achieved throughout the duration of the experiment.